HP 700 SE

The HP 700 SE is a tube preamplifier that features innovative precision technology as well as sonic refinements to the output stage. Like its predecessor, the HP 700, it meets the listener's individual wishes for their high-end combination thanks to its modular freedom. The new SE version now has two parallel XLR sockets next to the two RCA outputs on the back, allowing all variants of bi-amping. But even more important are the modifications to the actual Class A output stage.


Available Colors: Silver or Black


Refined tube technology and intelligent modular technology made the HP 700 future-proof right from the start - an innovation in the market. Now it was time to push the innovative HP 700 even further in terms of sound and technology. The new HP 700 SE is a tube preamplifier that features both new precision technology and tonal refinements of the output stage. Like its predecessor, its modular freedom meets the listener's individual demand for truly customized high-end setup. Instead of being bound by the fixed audio and technical parameters of the equipment, listeners can adapt the technology of the HP 700 SE to their individual requirements and preferences.

In the new SE version, there are now two parallel XLR sockets next to the two RCA outputs on the back panel, allowing all types of bi-amping. But the modifications of the actual Class-A-output stage are even more important. The search for the even finer sound took place with the help of extremely time-consuming and complex measurements, along with accompanying listening sessions. These difficult adjustments are responsible for the tonal improvements, especially the mid-tone of the pre-amplifier. The tube configuration remains unchanged compared to the predecessor HP 700, as do all the other tried-and-tested technical refinements on this incomparable preamp:


The term "precision technology" stands for a circuit in tube technology that has an extreme bandwidth up to 1 MHz, an impressively low output resistance of 100 ohms and sensationally low distortion of 0.001 %. Three amplification settings, combined with selectable output impedance, enable perfect fine-tuning of the HP 700 SE to the characteristics of the sound reproduction chain. The three-stage amplification settings allow optimal matching of the volume control to the efficiency of the speaker.


In combination with the newly developed, high-precision, low-noise supply-voltage stabilizing circuitry, the separate, magnetically shielded, outboard power supply of the HP 700 SE (essential for the low-noise and low-hum function of the MC-input) ensures constancy of the audio output even when the mains voltage is subject to wide fluctuations and high interference levels. Added to this, the integrated control logic system guarantees maximum operational reliability and, backed by our exclusive soft-start technologies, ensures the tubes and the unit have a life of up to twenty years.


The multi-channel bypass function allows the HP 700 SE to be integrated into an existing home-theater system. The logic-controlled input selector circuitry enables activation of the bypass function for an XLR or RCA input on the preamp's rear panel. The Home Cinema signal is present at all three outputs.


The connection possibilities of the generously configured standard HP 700 SE model are rounded off by two user-selectable, optional input modules. An optimized input module can be used for unique applications, for anything from an MC step-up transformer to a transformer-based XLR input module. The plug and play modules can be readily installed or upgraded at any time. PHONO Innovative technology has also been applied in the redesign of the Phono RIAA amplifier. The further development of the RIAA stage has improved the signal/noise ratio, while simultaneously reducing system-related distortion. The widening of the bandwidth enables accurate RIAA equalization and exploits the full potential of analog reproduction. The wide variety of optional input modules ensures that the optimal input can be installed for any cartridge.




Another innovation, the optional tone control, rounds off the HP 700 SE modularity. The valve-based, precision tone control unit guarantees consistency of the sound, even at low volume. Precise adjustment of bass and treble, with a 0.3 dB channel separation, allows the tone to be adjusted without impairing the spatial reproduction.


The frequency-compensated balance control allows channel-separated volume adjustment in 1 dB steps. This technology eliminates any controller-related sound shifts. Using 12-position stepped switches, the setting is long-time stable, with 100 % repeatability.


The HP 700 SE output can be switched to multiple zones by manual activation of the outputs. Whether the output is through XLR, RCA or all three outputs simultaneously, a total of three output stages can be utilized for separate rooms, different speakers or bi and tri-amping.


The optional, frequency-compensated, 47-position stepped switch ends the debate about the influence of the controller on the quality of the music signal. At 0.1 dB, the channel deviation is supreme. Our own in-house development, the volume control design constantly maintains the frequency bandwidth throughout the entire control range, reducing controller-related distortion to a barely measurable level. However, as a result of the mechanical design of the stepped attenuator, the switch positions cannot be controlled via the remote control.

Options HP 700 SE: Phono RIAA, modular inputs for phono and high level, level switch for volume, control unit see below.

Of course, the HP 700 SE has power management with soft start electronics, gain selector, monitor/record output and the HT bypass. (See technology for description)

General facts

Basic model HP 700 SE Line
Options Phono RIAA unit, 8 input modules, 47-pin step switch for volume, control unit
Design Silver or Black
Tube complement Line: ECC82, 2 x EF800; Phono: ECC83, ECC81, ECC88; Control modul: ECC88
Inputs 3 x RCA, 2 x XLR, 2 x free selectable, 1 x Bypass RCA
Outputs 2 x RCA, 1 x XLR, 1 x monitor / tape record (RCA)
Dimensions Preamplifier / Power Supply 462 x 130 x 480 mm / 110 x 90 x 277 mm (W x H x D)
Weight Preamplifier / Power Supply 10.0 kg / 3.8 kg


External power supply
Soft start control electronics Providing maximum tube life and trouble-free switching on and off
3 levels of amplification can be selected Adaptation to the efficiency of the speaker
XLR outputs with transformers Prevent hum disturbances
Freely selectable inputs By modular technology
Option Control Modul Tone and balance control, output selector switch
HT Bypass (optional) Bypass-function for multichannel/home cinema
Two parallel XLR outputs for Bi-Amping


Gain factor High: 25 dB = 18.5 / Med: 18 dB = 7.8 / Low: 12 dB = 4
Frequency response High: 10 Hz - 200 kHz -0.7 dB / Med: 10 Hz - 200 kHz -0.3 dB / Low: 10 Hz - 200 kHz -0.2 dB
Total harmonic distortion 0.01% at 3V on 10 kOhm
Signal-to-noise ratio High: -98 dB / 38 µV; Med: -104 dB / 18 µV; Low: -110 dB / 8 µV

Frequency response:

Frequency response and gain line stage in gain low (12 dB), med (18 dB) and high (25.5 dB) positions.


Line stage hum and noise level:

Even when measuring the noise level, no network influences are visible; the noise level decreases linearly by 6 dB each time the gain is adjusted.


Control range and frequency response tone controls:

The control range includes the area between the red and blue curves. The bass and treble can be raised and lowered precisely. In this way, tonal errors in the recording can be corrected.



HP 700 SE & MRE 220 Review from AUDIO 10/2021 - English version

"The spatial imaging in both width and depth gradation was impeccably ordered – and the Octave combi distinguished itself once more with incredibly fast transients and crystal-clear transparency."

Germany - AUDIO - October 2021

Read more

I want to sign up for the newsletter. You can unsubscribe from the newsletter at any time. You can access our data protection information here.